Welcome to our comprehensive guide on creating the perfect fishing lure with Envirotex Lite! This two-part epoxy resin is the go-to solution for lure makers everywhere. It’s durable, long-lasting, and will withstand even the toughest of fishing conditions. In this article, we will take you through everything you need to know about using Envirotex Lite to create high-quality fishing lures that will attract more fish to your line than ever before.
One of the most common questions that we receive from lure makers is “how much Envirotex Lite do I need for my lure?” It’s a valid concern, as using too much or too little resin can make or break the quality of your lure. Fortunately, we have the answer to that question and more in this guide.
So, whether you’re a seasoned pro or just starting, this guide will provide you with everything you need to know to make the perfect fishing lure with Envirotex Lite. Let’s dive in and discover the right amount of resin you need to create your best lure yet!
Table of Contents
Step-by-Step Guide to Using Envirotex Lite for Lures
If you’re new to the world of fishing lure making, the idea of using epoxy can seem daunting. But with Envirotex Lite, the process is simpler than you might think. To get started, gather your supplies: fishing lure blanks, Envirotex Lite, mixing cups and sticks, a torch or heat gun, and a protective covering for your work surface.
Once you have your supplies ready, the first step is to prep your lure blanks. Sand them down and make sure they’re free of any debris. Then, mix up a small amount of Envirotex Lite according to the instructions. Pour the epoxy over your lure blank, making sure it’s evenly coated.
Next, use your torch or heat gun to remove any air bubbles that may have formed on the surface of the epoxy. This will ensure a smooth, professional-looking finish. Be careful not to overheat the epoxy, as this can cause it to crack or bubble.
After the epoxy has cured, you can start adding your fishing lure designs. You can use paints, glitter, or other materials to create the perfect look for your lure. Once you’re satisfied with your design, mix up another batch of Envirotex Lite and pour it over the lure, making sure it’s coated evenly once again.
Finally, use your torch or heat gun once more to remove any air bubbles and create a smooth, glossy finish. Let the epoxy cure fully, and you’re ready to take your custom-made fishing lures out on the water!
Remember to always follow the instructions carefully and take precautions to protect yourself and your work area. With a little practice, you’ll be creating beautiful and effective fishing lures with Envirotex Lite in no time.
Step-by-Step Guide to Using Envirotex Lite for Lures
Prepare Your Workspace
Before starting, make sure your workspace is clean and free from any dust or debris that could end up in your lures. Clean your workspace with a damp cloth and let it dry completely.
Next, gather all of the materials you will need, including Envirotex Lite, mixing cups, stir sticks, and your lure molds. Organize everything so that it is within easy reach.
It is also a good idea to wear protective gear, such as gloves and safety glasses, to avoid skin or eye irritation from the resin.
If you are new to working with Envirotex Lite, it may be helpful to practice on a small test mold before moving on to your actual lure molds. This will give you a chance to get a feel for the material and the process before using it on your actual lures.
Properly preparing your workspace will ensure a smooth and successful process, so take the time to set up everything properly before getting started.
Why Envirotex Lite is Perfect for Fishing Lures
Envirotex Lite is a popular choice for making fishing lures because it is an epoxy resin that provides a durable, glossy finish. It is also waterproof and can withstand exposure to harsh weather conditions and saltwater, making it ideal for fishing lures.
Additionally, Envirotex Lite is easy to use and dries clear, ensuring that the color and detail of the lure are not obscured. The resin is also self-leveling, which means that it will settle evenly and create a smooth, glass-like surface.
Finally, Envirotex Lite is a cost-effective option for creating fishing lures. With a single kit, you can make multiple lures, which can save you money in the long run compared to purchasing pre-made lures.
Longevity: Envirotex Lite forms a hard, clear coating that protects the fishing lure from wear and tear, making it last longer than untreated lures.
Water-resistant: The coating is also water-resistant, making it ideal for fishing in saltwater or freshwater, where the lure is frequently exposed to moisture.
Scratch-resistant: The hard finish resists scratches, which is essential for fishing in rocky areas or where the lure may come into contact with underwater debris.
With Envirotex Lite, you can enhance the durability of your fishing lures and reduce the frequency of having to replace them.
Envirotex Lite: A Game-Changer for Lure Making
Are you tired of spending time and money on making fishing lures, only to have them break or lose their shine after a few uses? Look no further than Envirotex Lite, the game-changer for lure making. This two-part epoxy resin is designed to provide a durable and long-lasting finish that will protect your lures and keep them looking new.
Envirotex Lite is perfect for both novice and experienced lure makers. Its easy-to-use formula allows for precise mixing and application, ensuring a smooth and even finish every time. Plus, it dries clear, making it ideal for adding a protective coat over hand-painted designs.
But the benefits don’t stop there. Envirotex Lite is also resistant to yellowing, ensuring that your lures will maintain their original color and shine for years to come. Say goodbye to dull and faded lures and hello to a new era of fishing with Envirotex Lite.
Brings Professional Quality to DIY Lure Making
Professional finish: Envirotex Lite offers a high-gloss, crystal-clear finish that makes your lures look like they were made by a pro.
Easy to use: Even beginners can achieve professional results with Envirotex Lite. The two-part formula is easy to mix and apply, and the instructions are straightforward.
Versatile: Envirotex Lite can be used on a wide range of materials, including wood, plastic, and metal, making it a versatile option for DIY lure making.
Envirotex Lite takes the guesswork out of achieving a professional finish on your DIY fishing lures. With its easy-to-use two-part formula, crystal-clear finish, and versatility, it’s the go-to choice for many lure makers, from beginners to seasoned pros. Whether you’re making lures for yourself or to sell, Envirotex Lite can help you achieve a top-quality result every time.
The Benefits of Using Envirotex Lite for Fishing Lures
Durable: Envirotex Lite provides a strong and durable coating that can withstand the wear and tear of fishing in rough conditions. It can also protect your lure from damage caused by toothy fish.
Water-resistant: Envirotex Lite is highly water-resistant, meaning your lure will not absorb water and become waterlogged. This helps your lure maintain its balance and buoyancy, resulting in a more natural swimming action.
Customizable: With Envirotex Lite, you have the freedom to create unique and custom designs on your lures. You can add colors, glitter, and other embellishments to create a lure that stands out and attracts fish.
Professional-looking results: Using Envirotex Lite can give your homemade lures a professional-looking finish that rivals commercially made lures. This can give you a competitive edge on the water and help you catch more fish.
Overall, Envirotex Lite is an excellent choice for anglers who want to make high-quality, custom lures that can stand up to the rigors of fishing. Whether you’re a seasoned pro or a beginner, Envirotex Lite can help you take your lure-making to the next level.
Resistant to Cracking and Chipping
Durability: Envirotex Lite is a two-part epoxy that creates a durable finish that can withstand the wear and tear of fishing. It is resistant to cracking and chipping, ensuring that your lures will last longer and maintain their appearance.
Weather Resistance: Envirotex Lite is also weather-resistant, meaning it can withstand exposure to harsh outdoor conditions, including sunlight, rain, and wind. This feature is particularly important for fishing lures that are used in various weather conditions and water types.
Shock Absorption: The shock absorption qualities of Envirotex Lite make it ideal for creating fishing lures. The epoxy provides a protective barrier that can help reduce the risk of damage caused by impact, such as when a fish strikes the lure or when the lure hits rocks or other obstacles in the water.
Improved Aesthetics: Envirotex Lite provides a clear, high-gloss finish that enhances the look of your fishing lures, giving them a professional appearance that catches the eye of fish.
Reflects Light: The shiny finish of Envirotex Lite helps to reflect light in the water, making your lures more visible and attractive to fish.
Protects Paint and Designs: The thick, clear coating of Envirotex Lite helps to protect your paint and designs from fading, chipping, or cracking, so your lures look great even after repeated use.
Long-Lasting Protection Against Water and Sun Damage
Envirotex Lite provides a tough, waterproof coating that protects fishing lures from water damage. This is especially important since fishing lures are exposed to water for extended periods of time. Additionally, the coating protects against UV rays from the sun, which can fade the colors and weaken the material of the lure.
The long-lasting protection of Envirotex Lite ensures that your fishing lures will be able to withstand harsh conditions and last for many fishing trips to come. This not only saves money but also ensures that you have a reliable and effective lure for your next fishing trip.
The coating is easy to apply and dries clear, leaving a glossy finish on the lure. This added shine not only enhances the appearance of the lure but also makes it more visible to fish in the water, increasing your chances of catching a big one.
How to Avoid Common Mistakes When Using Envirotex Lite for Fishing Lures
Measure carefully: One of the most common mistakes when using Envirotex Lite is not measuring the resin and hardener accurately. Use a precise digital scale and follow the instructions carefully to ensure a proper mix.
Avoid air bubbles: Air bubbles can ruin the finish of your lure. To avoid them, stir the mixture gently and avoid over-mixing. You can also use a torch or heat gun to remove any bubbles that do form on the surface.
Protect your work area: Envirotex Lite can be messy and difficult to clean up once it hardens. Use a disposable mixing container and cover your work surface with plastic or newspaper. Wear gloves to protect your hands and dispose of any unused mixture properly.
Measure and Mix Envirotex Lite Correctly
One of the most important steps when using Envirotex Lite is to measure and mix the components correctly. Use a precise measuring tool, and mix the resin and hardener thoroughly, scraping the sides and bottom of the container, to ensure an even mix.
Measure out the amount of resin and hardener needed for the size of your lure, and mix them in a plastic cup for at least two minutes. Avoid mixing too quickly or too slowly, as this can cause the mixture to become too hot or cure unevenly.
When mixing, remember to wear protective gloves and work in a well-ventilated area. Following the manufacturer’s instructions carefully will help you achieve the best results and avoid common mistakes.
Avoid Overheating the Envirotex Lite Solution
One common mistake when using Envirotex Lite for fishing lures is overheating the solution. Overheating the solution can cause it to harden too quickly and may result in the formation of air bubbles.
To avoid overheating, mix only the amount of solution that you need and follow the instructions carefully. Use a thermometer to monitor the temperature of the solution during the mixing process, and avoid using heat guns or other heating devices to speed up the curing process.
Also, avoid mixing the solution in direct sunlight or in a hot and humid environment, as this can cause the solution to cure faster and may result in a sticky or uneven finish on your lure.
Expert Tips on Using Envirotex Lite for Fishing Lures
If you’re looking to create professional-looking fishing lures using Envirotex Lite, here are some expert tips to help you:
Mix the solution thoroughly: Ensure that you mix the Envirotex Lite solution thoroughly to avoid having any unreacted spots on your lure.
Use a respirator: When working with Envirotex Lite, it’s important to wear a respirator to avoid inhaling any fumes that may be harmful to your health.
Apply in a dust-free environment: Apply Envirotex Lite in a dust-free environment to avoid any particles sticking to your lure.
Let the solution cure completely: Allow the Envirotex Lite solution to cure completely before handling your lure to avoid any smudging or damage to the finish.
Experiment with color: Envirotex Lite can be tinted with a variety of colorants, so don’t be afraid to experiment with different color combinations to create unique and attractive fishing lures.
Use a Thin Layer of Envirotex Lite
Tip 1: When applying Envirotex Lite to your fishing lures, it’s important to use a thin layer to ensure even coverage and avoid any excess build-up.
Tip 2: Use a flat, level surface to work on your lures while the Envirotex Lite sets. This will prevent the solution from pooling or dripping, resulting in a more professional-looking finish.
Tip 3: To ensure a smooth and consistent coating, use a small brush to apply the Envirotex Lite to your lures. This will help you control the amount of solution applied and prevent any unwanted drips or bubbles.
Let the Envirotex Lite Dry in a Dust-Free Area
Dust-free area: It is crucial to allow the Envirotex Lite to dry in a clean and dust-free environment. Otherwise, dust particles can get stuck in the solution, leading to an uneven surface and blemishes on the lure’s finish.
Avoid moving the lure: Once the Envirotex Lite is applied to the lure, it’s essential to keep the lure stationary to prevent any dust particles from settling on the solution’s surface. Any movement during the drying process can cause dust particles to stick to the Envirotex Lite, which can ruin the finish.
Use a dust cover: If you’re working in an area with high dust levels, consider using a dust cover to protect the lure during the drying process. The dust cover should be large enough to cover the entire lure and allow sufficient ventilation for the Envirotex Lite to dry.
Remove any dust: Before applying the Envirotex Lite, clean the lure thoroughly to remove any dust, dirt, or debris. You can use a soft-bristled brush or compressed air to remove any debris from the surface of the lure.
Patience is key: The Envirotex Lite can take several hours to dry fully, and it’s essential to be patient and not rush the process. Rushing the drying process can lead to imperfections on the lure’s finish and may cause the Envirotex Lite to crack or peel over time.
Frequently Asked Questions
What is the recommended amount of Envirotex Lite for fishing lures?
The recommended amount of Envirotex Lite for fishing lures varies based on the size and number of lures being coated. Generally, a small amount is enough to cover a single lure, and a larger amount is required for multiple lures or larger ones. It’s best to consult the instructions provided by the manufacturer and use a digital scale to ensure the correct ratio of resin and hardener is used.
How can I determine the amount of Envirotex Lite needed for my fishing lures?
You can determine the amount of Envirotex Lite needed for your fishing lures by calculating the surface area of each lure and multiplying it by the thickness of the desired coating. A digital scale can be used to measure the correct amount of resin and hardener to ensure a proper mix. Alternatively, the manufacturer’s instructions may provide guidelines based on the size and number of lures being coated.
Can using too much Envirotex Lite on fishing lures be harmful?
Using too much Envirotex Lite on fishing lures can result in an uneven or lumpy coating, and may also cause the lure to become too heavy and sink improperly. Additionally, using more than the recommended amount can result in an excessive release of heat during the curing process, which can lead to the coating cracking or yellowing. It’s important to follow the manufacturer’s instructions and use the recommended amount of Envirotex Lite for optimal results.
Can I mix Envirotex Lite for fishing lures in bulk?
While it’s possible to mix Envirotex Lite for fishing lures in bulk, it’s generally not recommended. Mixing large amounts of resin and hardener at once can result in uneven mixing and a shorter working time, making it difficult to achieve a smooth, even coating. It’s best to mix smaller amounts of Envirotex Lite as needed and work quickly to ensure the best results.
How long does it take for Envirotex Lite to cure on fishing lures?
The curing time of Envirotex Lite on fishing lures depends on several factors, including the amount applied, the temperature and humidity of the environment, and the thickness of the coating. Generally, it takes 24 to 72 hours for Envirotex Lite to fully cure and become hard and glossy. It’s important to allow the coating to cure in a dust-free environment and avoid handling the lures until fully cured.
What should I do if I accidentally use too little Envirotex Lite on my fishing lures?
If you accidentally use too little Envirotex Lite on your fishing lures, you may not achieve the desired level of protection or appearance. However, you can apply a second coat of Envirotex Lite after the first coat has cured to achieve the desired level of thickness and protection. It’s important to ensure that the first coat is fully cured and sanded lightly before applying the second coat to ensure proper adhesion.