If you’re a serious angler, then you know there are few things more satisfying than catching big game fish like bass or pike. These hard-fighting predators require strong tackle to bring them to shore, which is why many anglers opt for wire-through-body fishing lures.
But if you’re new to this technique, it can be daunting trying to figure out the best way to rig your lure with wire. That’s why we’ve put together this ultimate guide on how to wire through body fishing lures. You’ll learn everything from the materials you need and techniques used in wiring your lures properly.
“A well-rigged wire-through-body bait stands up better to wear and tear caused by large jigs because hooks do not pull out easily. “- Eric Perez, Founder of Cajun Lures
This guide will teach you all about the benefits of using wire-through-body fishing lures and what kind of gear you should have. We’ll go over step-by-step instructions for hooking and wiring different types of baits including crankbaits, swimbaits, topwater baits and even soft plastics so that they stay rigged properly. ” So continue reading along as we share tips on achieving maximum results whether you’re throwing underhand casts into tight spaces or trolling deep waters offshore. “
What are through body fishing lures?
Through body fishing lures refer to a specific type of lure for catching fish. The term ‘through-body’ refers to the fact that these lures have a single wire running all the way through their bodies, from front to back.
The wire serves as a backbone, keeping the lure’s shape stable and allowing it to move smoothly through the water. It also acts as an anchor point for hooks and other components added to the lure.
Through-body fishing lures come in a variety of shapes, sizes, and materials. Some popular types include crankbaits, jerkbaits, stickbaits, and topwater plugs.
If you’re interested in making your own through-body fishing lures, one important skill to learn is how to properly wire them.
To start with wiring your own through-body fishing lure, you’ll need some basic supplies: wire cutters or pliers, a length of wire (preferably stainless steel), hook eyes or screw eyes for attaching hooks later on, and any special components you’d like to add such as blades or beads.
You’ll then need to drill pilot holes into the lure body where you want your wire to go through. Slide your wire through these holes and mold it so that it follows the contours of the lure shape precisely – this will ensure maximum stability when the completed lure is in use.
You can then attach eyelets at either end of your wired-through bait before painting your final masterpiece!
Understanding the anatomy of through body lures
Through body fishing lures are an essential tool in a fisherman’s kit. They can be made of various materials such as wood, plastic or metal and have different designs that cater to specific types of fish.
The anatomy of through body lures generally consist of three components:
- Head: The head is usually at the front of the lure and mimics the shape and characteristics of prey that fish would naturally eat. It often includes detailed features like eyes, fins, and scales.
- Body: The body comes after the head and has a streamlined structure which allows it to glide smoothly through water. It may also contain rattle chambers or other sound-making devices that mimic baitfish.
- Hooks: Mounted onto the end of the bodies; these hooks come in different sizes depending on what kind of fish you’re targeting. Anglers commonly used treble hooks although some prefer single ones as they show better results when catching larger species like trout. .
To wire through body fishing lures properly – drill out two holes separated by about an inch into the side near one edge where you want your hook placement using angle accurate device for more precise drilling then thread both wires through each hole leaving sticking out enough to attach whatever hook desired.
“Proper wiring ensures less stress on the material thus extending new life span”
Making sure that your hooks are straight and completely installed while rebuilding deteriorated hardware will result in quality casting success rate with a longer shelf life for your tackle.In conclusion, take care when constructing your fishing tackle setup. Wiring through-body fishing Lures require attention to detail but doing so means you’ll have a reliable and efficient setup to tackle any species that is within your swim range.
Why should you wire through body fishing lures?
If you are an avid fisherman, then you know how important it is to use the right type of lure for a successful catch. One popular technique used by many experienced anglers is to wire through the body of their fishing lures for added durability and effectiveness.
Wiring through the body of your fishing lure provides several benefits compared to traditional rigging methods:
“Using this method makes your bait more durable since it reduces wear and tear on its parts. “
This technique also enables the hook to be securely connected with the line, which increases your chances of hooking a big fish successfully. Moreover, wiring through helps avoid losing valuable baits due to broken hooks or lines because they prevent damage and slippage.
To learn how to wire through body fishing lures properly first, identify where exactly you want to thread the wire. Then take a thin but sturdy gauge wire that can go through both endpoints without breaking off easily. Don’t forget yo consider size depending on your preference- if too small In terms of tearing capacity when hooked up against bigger gamefishes like tuna or marlins could mean disaster while larger wires might reduce mobility in water.In conclusion, Wiring Through Body Fishing Lure is worth trying out as it provides lots of benefits such as reducing wear and tear from using loads on bait thus making it last longer than other types available; enabling secure connection between hook-line providing greater assurance during catches leading higher chance’s success rates especially those seeking vibrant aquatic life forms like bass, fisherman trout among others.
Benefits of wiring through body lures
Wiring through body fishing lures is a technique that has been around for many years. It involves running a wire or stiff material through the center of your lure to give it added strength and stability. This method offers several benefits over other types of lure attachments.
The first benefit of wiring through body lures is increased durability. By adding a wire, you can ensure that your lure will hold up against even the toughest fish. Without this type of reinforcement, plastic or soft-bodied lures are more likely to tear or be damaged when they come in contact with rocky bottoms or sharp objects underwater.
Another advantage of this technique is superior action. By rigidly attaching the hook to the lure’s body, you’ll have more control over how it moves through the water. A properly wired lure will match your desired presentation more precisely than one attached using another method, making it easier to entice fish into biting.
“How To Wire Through Body Fishing Lures?”
Finally, fishing with wired-through-body lures lets you explore different depths with less hassle since these types of baits stay more balanced under stress and maintain their depth throughout movement. If you’re looking to try something new on your next fishing trip, consider switching to wired through bait techniques. You may find yourself reeling in bigger catches that were once out of reach.
When to wire through body lures
If you have been using fishing lures for a while, then you know that there are different types of lures available in the market. One type is wired through the body lure, which is designed to make your catch easier and reduce the chances of losing fish.
The ideal time to use a wired through the body lure would be when you’re targeting larger fish like bass or pike. This type of lure works best when casting near logs, rocks, deep water structures, and places where predatory fish hide. By wiring your bait through its body, it will ensure that even if a fish takes multiple aggressive bites on your prey’s tail end first without catching hold of anything else, you still stand a good chance at making an effective catch with the placement of this kind of lure.
Tip: When using wired through body lures always let them hit against structure before retrieving because it can attract nearby fishes given off vibrations from hitting things submerged under water.
An added advantage of this type of lure is that it reduces the chances of losing your hook due to snags since the line doesn’t pass over the body and cause less friction while being reeled back in. All-in-all wired through body lures offer a more successful way to increase catches so anglers should definitely keep these in their tackle box!
What tools and materials do you need?
Wiring through body fishing lures can be tricky, but it isn’t impossible. Before getting started, make sure you have the right tools and materials on hand.
Firstly, you will require a set of needle-nose pliers. These sharp-tipped pliers are perfect for bending wires into shape without causing any damage to the lure’s body.
You’ll also want a wire cutter around if possible. Cutting wires smoothly is essential when creating wiring paths to connect hooks or other components within your fishing lure.
In addition, having some thin-gauge wire like 20-26 gauge single strand copper wire would come in handy as well. This type of cable is flexible enough to allow easy manipulation around curves while still remaining durable enough not to break. Lastly, don’t forget about adhesive glue that allows durable use! You may consider using epoxy glue which provides an efficient bonding result over different surfaces such as metal or plastic-made lures. If you want to create an intricate design of the lure, try shaping its alternatives choices in addition – including beads or feathers!
Always ensure a clean workspace with proper ventilation before starting this project.Remember these tips when wiring through body fishing lures; they might become useful later on during the process.
Essential ToolsIf you’re interested in fishing, then knowing how to wire through body fishing lures is essential for your arsenal. To achieve this, here are some necessary tools you need:
Wire cutters and pliers:To get started with wiring through the body of a fishing lure, you will require a set of quality wire cutters and pliers. These tools will be useful when cutting the wires or while bending it into shape.
Needle-nose pliers:A needle nose plier is an excellent tool that assists in grabbing onto small sections of wire and holding them securely without slipping out even if it’s still wet from bait juice.
Fishing line:Having a strong and reliable fishing line is crucial when making these types of rigs as the technique requires accuracy and precision throughout every stage.
A drill bit set:One common problem faced by anglers while wiring through the body of a fishing lure is difficulties drilling holes in it. Using different sized drill bits provides more options when selecting which type of wire would work best for each specific application.
“Learning how to use these essential tools properly can make all the difference between successful strikes and no catch. “Incorporating wiring techniques such as tying hooks around tricky spots on your favorite lure may seem daunting at first but having faith in using proper equipment makes it easier. Once mastered, converting any unmodified jig head or plastic worm tackle becomes increasingly effortless regardless of skill level. So why not give it a try!
If you’re looking to wire through body fishing lures, there are a few recommended materials that can help make the process as easy and efficient as possible. Here’s what you’ll need:
1. Fishing Wire: The first thing you’ll need is some strong, flexible fishing wire. Look for something with a weight rating appropriate for your target fish species; this will help ensure that your lure stays intact even when dealing with aggressive bites.
2. Split Ring Pliers: These pliers are essential for opening split rings and adding or removing hooks from your lure design. They come in many different sizes so be sure to choose one that matches the size of ring you’ll be using on your chosen baitfish body or jighead.
3. Jigheads: Whether it’s saltwater or freshwater applications, choosing a color scheme should be more dependent on water clarity than strict personal preference initially, while working towards matching local live bait colors like shrimp bodies, mullet and sand-eels somewhat later!
Note: You may also want needle-nose pliers to help pull the blunt end of the leader back through where it came out once you’ve completed threading our main barrel lengthwise.
4. A Vice Grip/Clamp System:A reliable clamping system allows anglers control when piercing/tackling their target material & shells by securely holding everything down whilst inserting screws into/lifting out wiring tunnels upon set measurements made earlier (we recommend 1-2mm bars here).
Step-by-Step Guide: How to wire through body fishing lures
In order to maximize your chances of catching fish, it’s important to use the right lure. One type of lure that can be effective is a wired-through-body fishing lure.
To start, you’ll need a few tools and supplies:
- A fishing rod and reel combo
- A wired-through-body fishing lure
- Fishing line or leader material (a strong monofilament or fluorocarbon line will work best)
- A pair of pliers for cutting and bending wire
The first step is to attach your chosen leader material to the top eyelet of the wired-through-body Fishing Lure using an improved clinch knot. This should be done before attaching the hook as threading afterwards might become difficult especially when it keeps slipping off the thread. Take about two feet of line from its end facing down towards the tip of your pole, then make six twists around itself near where it meets up with those tiny guide holes nearest each other so they don’t get tangled or knotted together during casting which makes reeling in impossible sometimes!
Note: While choosing wires for wiring one needs to keep in mind the corrosion resistance making stainless steel and tinned copper popular options for this purpose.
Next, take a piece of wire approximately twice as long as your chosen Wired Through Body Fishing Lure length after ensuring that enough amount is left on both sides if bent in half properly – cut it straightly at midpoint creating equal lengths- forming a U-shaped format. Slip one end onto your bait’s through-wire while holding firmly against whatever backing loop there may lie nearby; bend aside like crimping covering entirely built-in nooks ensuring a tight pinch for more secure handling during casting and retrieval processes, then repeat on the other side.
Now attach your chosen hook to the last section of wire by threading it through the eyelet and crimping it in place with pliers so that it’s securely held down.
Your wired-through-body fishing lure is now ready to be used! Tie your line onto your reel spool using another improved clinch knot, cast out into your desired location. With its added weight distribution this type of Fishing Lure can easily travel far along a mid-range distance effortlessly making sure you don’t miss any fish that are waiting for prey!
Preparing the lure
If you are an avid angler, then you know that fishing lures come in different shapes and sizes. One of the popular types is through-body fishing lures. These kinds of lures are beneficial because their wiring system passes through their body, making them sturdier and more reliable than other alternatives.
To wire through-body fishing lures, you need a few tools such as wires, pliers, beads and hooks. The first step when preparing your lure is to determine which type of fish you want to catch so that you can choose the suitable color for the bead and hook.
The process begins with threading one end of the two or three feet of wire through the hole at one end of the bead and tying it in place using a knot. Next, add the desired number of beads on either side of it until they reach approximately halfway down the length of its wire frame.
After adding beads onto your line appropriately, insert one end of each wire into opposite sides’ holes where you hope your hooks will be attached later before twisting these two ends together tightly under slight tension around themselves by use another pairlong-nose pliers.
All said and done; You have spun up yourself enough whipping-winding skills around some metal thread to tie an effective jigging mechanism suitable for varying depths!
In conclusion, wiring through-body fishing lures requires diligence and patience but yields results worth admiring if done correctly by employing all necessary components like wires, pliers, beads among others centered towards meeting prospective intended catches.
Creating the wire loop
If you want to make your own fishing lures, knowing how to wire through body fishing lures can be incredibly helpful. One of the first things you’ll need to know is how to create a wire loop for attaching your hook.
To start, you’ll need some stainless steel wire that’s about. 045 inches in diameter. You’ll also need some pliers and a wire cutter.
Begin by cutting off a length of wire that’s long enough for your lure. Then use your pliers to bend one end of the wire into a small loop. Make sure it’s big enough for your hook eye to fit through.
Pro tip: Use round-nosed pliers if you have them. They’ll help create more uniform loops than regular flat-nose pliers.
Next, hold onto the opposite end of the wire with your pliers and wrap it around whatever tool or object you’re using as a mandrel. This could be anything from a nail to a pen depending on the size of your desired loop.
Once you’ve made one full coil around the mandrel, remove it from the tool and continue wrapping until you get back up to the original loop at the other end.
Cut off any excess wire and use your pliers to press both ends down tight against each other while still holding their shape.
Your new wire loop is now ready to attach to whatever kind of fish lure you’re making!
Inserting the wire loop through the lure
If you love fishing, then you know that using body lures is one of the most effective ways to catch fish. But how do you get the wire through these stubborn lures? The process may seem tricky at first, but once you master it, inserting a wire through a body fishing lure is relatively straightforward.
The first step in this process is making sure that your wires are straight and kink-free. Using pliers, create a small loop at one end of your wire. This will serve as an anchor point for attaching the hook later on.
Next, insert the other straightened end into one side of the hole intended for insertion. Push it through until it comes out from the opposite side of the lure.
Note: Some anglers prefer heating up their wires before attempting insertion to make them more malleable and easy to work with. While heat treatment can be helpful, excessive heat can weaken or break down some kinds of plastic bodies.
To help avoid tangles when threading your line back onto your newly wired bait, run your fingers alongside any excess portions of uncut metal sticking out from each side of your now-wired lure shafts and bend these bends downward so they’re flush with surface level finish on either side.
Congratulations! You’ve successfully learned how to attach wires through body fishing lures seamlessly!
Tips and tricks for wiring through body lures
Fishing with a wired-through-body fishing lure is an effective way to prevent losing lures. Your line gets threaded directly through the bait, providing better control over your presentation.
Here are some tips for properly wiring-through-body fishing lures:
Selecting appropriate tools: You need to have a wire cutter, pliers, drill bit, glue gun handy before starting this process. Prepare hooks and wires too as per desired size.
Drilling the hole: Once you select your preferred hook size, make sure that it matches the diameter of the pre-drilled hole in your lure from where it goes up to head-to-tail direction; otherwise, you’ll have trouble threading.
“The correct angle when holding or drilling into the surface area of the hardbait during installation is crucial, ” said Mark Fisher, Owner & CEO at Wet Rooster Jigs Fishing Tackle. “If not done right, you could break through the exterior /specific part altogether. “
Wiring: After ensuring both holes’ matching sizes(you may even use wire opening tool available ), insert AFW Wire Leader Wheel’s stainless steel wire (or any suitable) into one end and thread all successively through each section until it comes out at tail-end portion – then connect small eye-let forming firm loops on either ends of every wire segment while leaving ample space to add split rings or hook connectors afterwards.
Safety measures: Cover sharp edges using Loctite Super Glue(Not advisable while Handling). Practice utmost care because it can harm you fatally if misused. Always handle your gear carefully!Note: These techniques will ensure that you don’t lose your expensive lures; hence, choose the best configurations of wires and ring clasps to allow lure swings in water.
Choosing the right wire thickness
If you want to learn how to wire through body fishing lures, selecting the right gauge of wire is essential. This will determine how durable and strong your lure will be, allowing it to handle big fish without breaking or bending.
The thickness of the wire used determines the strength and flexibility of the finished product is important as you don’t want something that is too thin which can break easily, nor do you want something thick with no give when under stress.
To get started with wiring a fishing lure through its body, start by focusing on wires from 0. 5mm – 1. 2mm in diameter. If using a saltwater setup then go for thicker wiring options because heavy currents put more strain on them.
Remember: “The key rule when deciding on what type of wire to use always take into consideration where, what they are going to be fishing for. “
You should eliminate wires thinner than this range unless targeting species like small panfish or trout exclusively. Thick gauge wires greater than this size can also be challenging to work within confined spaces making them ideal only if aiming at bigger prey animals regularly found in freshwater bodies.
In summary, ensure that you match your bait lure’s overall rigidity with the relevant weight required for each casting motion before choosing an appropriate wire thickness level based upon personal preference/skill level alongside durability concerns.
Securing the wire loopWhen it comes to wiring through body fishing lures, one of the most important steps is securing the wire loop that will hold your hook. This ensures that your lure stays together and functions properly while in use. There are a few different methods you can use to secure your wire loop, but one of the most common involves using small crimping beads.
To start, create your wire loop by bending a piece of steel or brass wire into the desired shape for your specific lure design. Make sure to leave a tail length long enough for crimping later on.
Next, slide a small crimping bead onto the tail end of your wire and thread it close to where the bend starts (but not too close). The bead should be flush against or just barely above where you want the hook eyelet to sit.
Now take an appropriate-sized plier and carefully squeeze down on the bead with moderate pressure so that it flattens onto itself around both sides of the looped wire. Be careful to not apply too much pressure as this could damage or weaken the integrity of your material.
“Pro tip: adding glue inside each side beads before squeezing them shut provides extra security. “
You may repeat these steps once more for added measures although if done correctly, one set (bead pair) would suffice unless there’s issues with fit further along during assembly i. e larger hooks/hooks eyes than previously tested-. In conclusion keeping things tight patience will go far when trying out any new techniques which vary by individual preference and trial-and-error experience at hand.
Testing the durability of the wiring
When it comes to fishing lures, having one that is wired through the body can make a big difference in terms of strength and durability. However, it’s important to test the wiring before using it out on the water.
To do this, first inspect the wiring closely for any kinks or weak points. If everything looks good, gently tug at the wire to ensure that it is secure within the lure. You don’t want it coming loose during use!
Next, take your lure and attach it securely to a heavy weight or object (such as a door handle). Hold onto the end of the line and give several sharp pulls to simulate strikes from fish. Pay attention to how well the wire holds up – if you notice any damage or wear after just a few pulls, then you may need to reinforce or replace it.
“A strong connection between lure and rigging ensures better control while angling. “
If all seems good with your testing, then you’re ready to hit the water with confidence! Just keep in mind that even properly wired lures can still suffer wear over time due to exposure to elements like saltwater or excessive casting/retrieving. It’s always a good idea to periodically check and replace your wires when needed.
ConclusionWiring through body fishing lures can significantly improve your fishing game by making the lure more durable and enhancing its performance under various conditions. With a little bit of patience and practice, you will be able to master this technique in no time.
Always make sure to use high-quality wires that are strong enough to withstand the pressure exerted on them during casting or retrieval. Take every preventive measure to avoid injuries while wiring as sharp hooks can easily pierce through skin.
Additionally, try experimenting with different wire colors based on water clarity and weather conditions for better results. A brightly colored wire may attract fish in murky waters while duller shades become invisible under clear skies.
Remember to carefully adjust weights along with wiring patterns according to depth levels where you intend to cast the lure. Keep practicing until you develop your own unique style that works best for your specific techniques and fishing goals.
“Wiring through Body Fishing Lures takes time and effort, but once mastered it’s an effective way of catching many types of fish. “In conclusion, whether you’re learning how to wire through body fishing lures from scratch or just brushing up on some techniques, incorporating this skill into your arsenal is bound to give you excellent results when it comes down to pulling in those big catches all year round!
Frequently Asked Questions
How do you choose the right wire for wiring through body fishing lures?
When choosing wire for wiring through body fishing lures, consider the size and weight of the lure, the type of fish you are targeting, and the fishing conditions. Stainless steel wire is a popular choice because it is strong, corrosion-resistant, and can handle heavy loads. However, if you are targeting smaller fish, you may want to use a thinner and more flexible wire. It is also important to choose a wire that is easy to work with and won’t kink or break easily.
What tools are needed for wiring through body fishing lures?
The tools you will need for wiring through body fishing lures include wire cutters, pliers, a wire bender, and a vise. Wire cutters are used to cut the wire to the correct length, pliers are used to bend and shape the wire, a wire bender is used to create loops and bends in the wire, and a vise is used to hold the lure in place while you work. You may also want to use a magnifying glass to help you see small details and a ruler to measure the wire and ensure consistency.
What is the step-by-step process for wiring through body fishing lures?
The step-by-step process for wiring through body fishing lures is as follows: first, cut a length of wire to the desired size. Next, bend the wire into the desired shape using pliers and a wire bender. Then, insert the wire into the body of the lure and bend the ends of the wire to secure it in place. Finally, attach the hooks and other components to the wire using pliers and wire cutters. It is important to work carefully and precisely to ensure a secure and effective wiring job.
What are some tips for preventing wire breakage when wiring through body fishing lures?
To prevent wire breakage when wiring through body fishing lures, it is important to use high-quality wire that is strong and flexible. You should also avoid over-bending or over-twisting the wire, as this can weaken it and increase the risk of breakage. Additionally, be careful not to nick or damage the wire while working with it, and be sure to use the appropriate tools for the job. Finally, test your wiring job carefully before using the lure to ensure that it is secure and will not break under pressure.
Are there any safety precautions to take when wiring through body fishing lures?
When wiring through body fishing lures, it is important to take some basic safety precautions. Wear eye protection to prevent injury from flying wire or sharp hooks, and be careful not to cut yourself on the wire or other tools. It is also a good idea to work in a well-ventilated area to avoid inhaling fumes from any adhesives or coatings you may be using. Finally, be careful not to damage the lure itself or any other nearby objects while working, as this could cause injury or damage to your equipment.
How do you know if your wiring through body fishing lures is successful?
If your wiring through body fishing lures is successful, the wire will be securely attached to the lure and will not break or come loose during use. You should be able to test the strength of the wiring job by pulling on the wire with your fingers or with a pair of pliers. If the wire holds firm and does not break, you can be confident that your wiring job was successful. Additionally, you should be able to attach hooks and other components to the wire without difficulty, and the lure should perform well in the water.